2010 John Deere LA115
19.5-horsepower Briggs & Stratton Anti-Vibration System (AVS) single-cylinder engine has plenty of power and torque to handle tough mulching, mowing, and bagging conditions.
Electronic ignition for fast starts
Cast-iron sleeve for long engine life
Overhead valves for excellent power and fuel economy
Full-pressure lubrication and oil filter keep oil cleaner for long engine life and extends time between oil changes; full-pressure lubrication is also more effective when operating the tractor on an incline
No-tools oil drain valve provides easy access for oil changes.
The solid one-piece frame is constructed of 12-gauge (0.11-in., 3.0 mm) steel.
Full-length robotically welded frame design has high-strength steel rails for added strength and long life
One-piece fender deck is bolted to the frame
The CargO MountTM system is a combination of front and rear mounting points that provide convenient and easy installation of the sun canopy, rear bagger, and other attachments.
The front axle is constructed of solid cast iron that will not bend.
Automotive-like steering system with sector and pinion steering gears with dual drag links provides a very strong, low-effort, and tight-turning system
Grease fittings allow regular lubrication to help maintain easy steering and minimize wear
Large, 3/4-in. diameter wheel spindles provide excellent durability
A Kanzaki Tuff Torq™ hydro/automatic transmission gives an infinite choice of speeds and makes changing direction of travel easy.
Automotive-type accelerator provides infinite speed selection for the ultimate in operator comfort and convenience
Pedals have a different shape and motion for easy identification and increased safety
Easy-to-use cruise control option maintains the tractor's speed for mowing larger areas.
To engage, lift up on cruise lever and hold until foot is removed from forward pedal
To disengage, lightly press then release forward pedal
For emergency stops, cruise can be released by pushing on the brake pedal or pushing down on the cruise control lever
Openings on the side of the hood let in plenty of cooling air while keeping the sound level low
Two headlights provide good lighting for nighttime operation
Three-spoke steering wheel for greater operator comfort and control.
Ignition switch is on the dash for starting ease.
Wide footrest areas with non-slip, anti-vibration rubber footpads are provided for operator comfort and safety.
Operator seat can be easily adjusted forward or rearward while in the seat, with seat travel of 5-1/2-in. and 10 different positions.
Seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.
Beverage holder is found on the right side fender for added value and operator convenience.
The fuel tank provides visibility to the amount of fuel in the tank.
The EdgeTM Cutting System has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give the mower superior convenience, performance, and reliability.
Deep-deck mower design lifts grass for a clean, even cut
Smooth underside of mower prevents grass buildup and evenly disperses grass clippings
The rolled outer edge of the deck provides extra strength and protection
Dual-stage E-coat and powder paint coatings provide extra protection from rust
The 42-in. two-spindle, three-in-one mower is constructed of 12-gauge (.105-in., 2.7 mm) steel.
Requires no tools to go from mulching to side discharge to rear bagging
2010 John Deere LA115
- Overhead valves
- Briggs & Stratton
- 30.5 cu in. (500 cc)
- Rated Horsepower
- 19.5 hp (14.5 kW)
- Forward 0-5 mph/Reverse 0-3.2 mph
- Fuel Capacity
- 2.1 U.S. gallon (2.25 U.S. gallon for California model)
- Turning Radius
- 18 in.
- Tires Rear
- Tires Front
- 41-in. (104 cm)
- 52-in. (132 cm)
- 69.9-in. (177.5 cm)
- 48.9-in. (124.2 cm)
- Seat Height
- 11 in.
- Charging System
- 9 amp regulated
- Cutting Width
- 42 in.
- Cutting Height
- 1-4 in., 13 positions
- Front Draft-Spring pin / Rear Draft-Spring pins
- Mower Drive System
- Manual PTO
- Mower Deck Material
- .105 in. (12 ga)
- Cut Height Increments
- 0.25 in.
- 2 year
- Fully welded